M4 Wet Heavy Metal Milling Unit – The all-rounder
The M4 Wet Heavy Metal is a 1500 W and 350 kg milling unit, which withstands all vibrations. It is equipped with the proven 5+1 axes simultaneous milling technology and can process both hard and soft materials, thanks to the integrated wet processing function. The centrepiece consists of a 360° rotatable workpiece table, which makes it possible to mill also hard-to-reach areas, as undercuts and divergences without any problems. The extra-large milling area with different types of blank holders permits the elaboration of up to 10 models, 20 full-arch bridges and
30 Raw-Abutments® or glass-ceramic blanks in a single milling process. The integrated tool changer function and the tool magazine allow the automatic exchange of up to 32 elaboration tools. The optical tool detection (optional) prevents the use of wrong elaboration tools. As a stand-alone solution with integrated PC and touchscreen (optional), milling processes and calibration processes can also be started directly on the milling unit and elaboration tools can be loaded.
Basic Equipment
- Computer-controlled 5+1 axis simultaneous milling unit with 32-fold tool changer and wet processing function for processing of all dental prosthesis materials (zirconia, resin, wax, sinter metal, chrome-cobalt, titanium, precast titanium abutment blanks Raw-Abutments®, glass ceramics and composite)
- Different blank holder for round material blanks and other material forms:
- 2-Blank-Plate M4
- 4-Blank-Plate M4
- Teleskoper Plate M4
- Raw-Abutment® Holder M4
- Glass Ceramics Holder M4
Overview of the characteristics
- 5+1 axes simultaneous milling technology optionally with Milling Spindle Hard Automatic or Performance Milling Spindle M4 (high-performance, water-cooled milling spindle with integrated suction device; at extra charge)
- CAD/CAM milling bur 6 mm for more stability during the milling process
- For processing zirconia, resin, wax, wood, sinter metal, chrome-cobalt, titanium as well as precast titanium abutment blanks
(Raw-Abutments®), glass ceramics and composite - With an extra large milling area (39 x 17 cm) specifically suitable for the production of models (up to 20 full arch bridges)
- The tool changer function and the tool magazine enable the automatic changing of up to 32 milling tools
- The automatically opening protective glass prevents that milling chips and other dirt particles contaminate the tools stored in the tool magazine
- During the elaboration of resins, the Ioniser (optional) ensures a clean milling unit by discharging the plastic shavings. This results in more cleanliness during the milling process and increases the machine performance since cleaning is no longer necessary
- Different combinable blank holders (mainly included in the scope of delivery): 2-Blank-Plate M4, 4-Blank-Plate M4, Teleskoper Plate M4, Raw-Abutment® Holder M4, Glass Ceramics Holder M4, Combi-Holder Raw/Glass M4, JawPositioner Support
- All structures needed for the manufacturing of a complex dental restoration can be produced in a single milling process
Accessories
 |
Ioniser M4 Device for the electrostatic discharge of plastic shavings for more cleanliness during the milling process (optionally for the new device or as retrofitting article) товарный номер: ZBAC3301 |
|
 |
Raw-Abutment® Holder Holder for fixing and for the serial processing of up to ten prefabricated titanium abutment blanks (Raw-Abutments®) in the Zirkonzahn milling unit товарный номер: ZBAC3451 |
|
 |
Glass Ceramics Holder Holder for fixing and for the serial processing of up to ten glass ceramic blanks in the Zirkonzahn milling unit товарный номер: ZBAC3431 |
|
 |
2-Blank-Plate M4 Holding device for the elaboration of up to two material blanks (Ø 95 mm) with the M4 Wet Heavy Metal milling unit товарный номер: ZBAC3411 |
|
 |
4-Blank-Plate M4 Holding device for processing up to four material blanks (Ø 95 mm) with the M4 Wet Heavy Metal milling unit товарный номер: ZBAC3401 |
|
 |
Teleskoper Plate M4 Holding device for processing one material blank (Ø 95 mm, Ø 98 mm, Ø 106 or Ø 125 mm) with the M4 Wet Heavy Metal milling unit товарный номер: ZBAC3421 |
|
 |
новый! Blank Holder Teleskoper Soft Resin holder for fixing soft material blanks (zirconia, resin, wax, wood and Sinternit). |
Maximum flexibility
Depending on the work requirements, various blank holders can be combined in the 360° rotatable workpiece table:
 |
 |
|
| Option 1 Workpiece table with extra-large Model Blank M4 Beige – for the production of up to 20 full arches in a single milling process. |
Option 2 4 Blank-Plate – Blank holder with inserts for up to 4 material blanks Ø 95 mm; in this way the different materials needed for a restoration can be processed in just one milling process. |
|
 |
 |
|
|
Option 3 3 x Raw-Abutment® Holder M4 – up to 30 Raw-Abutments® can be processed in a single milling process.3 x Glass Ceramics Holder M4 for the processing of up to 30 glass ceramic blanks. |
Option 4 2-Blank-Plate with a Raw-Abutment® Holder M4 each or a Glass Ceramics Holder M4 – for the processing of 2 material blanks Ø 95 mm, 10 Raw-Abutment® blanks or10 glass ceramic blanks. |
Processable materials with full equipment
|
Technical specifications
|
|
|||||
| Weight | 350 kg | ||||
|
|
|||||
| Width | 123 cm | ||||
|
|
|||||
| Height | 69 cm | ||||
|
|
|||||
| Depth | 84 cm | ||||
|
|
|||||
| Casing | Hardened Securit glass UNI ISO 12150 | ||||
|
|
|||||
| Processing axes | 5+1 | ||||
|
|
|||||
| Power capacity | 1500 W | ||||
|
|
|||||
| Operating voltage | 100 – 240V | ||||
|
|
|||||
| Power input | 6.5 A (13.5 A) | ||||
|
|
|||||
| Chuck | Ø 6 mm | ||||
|
|
|||||
| Spindle speed | Depending on equipment | ||||
|
|
|||||
| Torque | 13 Ncm | ||||
|
|
|||||
| Workpiece | Model Blank M4 (39 x 17 mm), material blanks (Ø 95 mm), Raw-Abutments® | ||||
|
|
|||||
