ZZ Screw-Tec-System
W celu połączenia (śrubami) konstrukcji wtórnych można użyć tzw. wkładki (wsadu) gwintowego "Srew-Tec"
|
|
W celu połączenia (śrubami) konstrukcji wtórnych można użyć tzw. wkładki (wsadu) gwintowego "Srew-Tec"
Screw-Tec
 |
Set Screw-Tec-Tools Paczka zawiera:
|
||||||
 |
Screw-tap 2.625 Special tapping tool for zirconia Cuts thread into ‘green’ pre-sintered zirconia (shrinkage factor 20%) for threaded bush SSAA0020 Paczka zawiera: 1 piece Numer katalogowy: SW005 |
||||||
 |
Positioning stylus Positioning stylus for Screw-tap 2.625 Paczka zawiera: 1 piece Numer katalogowy: SW007 |
||||||
 |
Bush-driver Used to screw threaded bush into tapped thread (SSAA0020) after sintering Paczka zawiera: 1 piece Numer katalogowy: SW008 |
||||||
 |
Hexagonal wrench long Used for cylinder-head screws M1.4 (SSAA0040, SSAA0041) Paczka zawiera: 1 piece Numer katalogowy: SW009 |
||||||
 |
Hexagonal wrench short Used for cylinder-head screws M1.4 (SSAA0040, SSAA0041) Paczka zawiera: 1 piece Numer katalogowy: SW010 |
||||||
 |
Milling Bur 2W30 Used to mill screw seats Paczka zawiera: 1 piece Numer katalogowy: FR611 |
||||||
 |
Stylus 2W30 Reads the parameters of the mock-up frame To be used with the corresponding milling bur Paczka zawiera: 1 piece Numer katalogowy: TS611 |
||||||
 |
Cylinder-head screw M1.4 x 6.7 with threaded bush (titanium) Paczka zawiera: 1x Cylinder-head screw M1.4 x 6.7 (titanium) 1x Threaded bush (titanium) Numer katalogowy: SSAA1001 |
||||||
 |
Cylinder-head screw M1.4 x 6.2 with threaded bush (titanium) Paczka zawiera: 1x Cylinder-head screw M1.4 x 6.2 (titanium) 1x Threaded bush (titanium) Numer katalogowy: SSAA1101 |
||||||
 |
Threaded bush (titanium) Titanium insert with special outer thread for zirconia and internal thread for cylinder-head screws M1.4 Paczka zawiera: 1 piece Numer katalogowy: SSAA0020 |
||||||
 |
Cylinder-head screw M1.4 x 6.7 (titanium) For use in combination with threaded bush SSAA0020 Longer thread for extra tight grip Paczka zawiera: 1 piece Numer katalogowy: SSAA0040 |
||||||
 |
Cylinder-head screw M1.4 x 6.2 (titanium) For use in combination with threaded bush SSAA0020 Paczka zawiera: 1 piece Numer katalogowy: SSAA0041 |
||||||
 |
Modelling-sleeve long and positioning sleeve for positioning stylus (brass) Paczka zawiera: 1x Model cartridge long (brass) 1x Positioning sleeve (brass) Numer katalogowy: SSAA1501 |
||||||
 |
Modelling-sleeve short and positioning sleeve for positioning stylus (brass) Paczka zawiera: 1x Model cartridge short (brass) 1x Positioning sleeve (brass) Numer katalogowy: SSAA1601 |
||||||
 |
Positioning sleeve for positioning stylus (brass) Brass guide sleeve for location of bush position inside mock-up frame. Guides drill hole into zirconia for threaded bush SSAA0020 Paczka zawiera: 1 piece Numer katalogowy: SSAA0010 |
||||||
 |
Model cartridge long (brass) Determines screw position in mock-up frame Cylinder-head screw M1.4 x 6.7 Paczka zawiera: 1 piece Numer katalogowy: SSAA0060 |
||||||
 |
Model cartridge short (brass) Determines screw position in mock-up frame Cylinder-head screw M1.4 x 6.2 Paczka zawiera: 1 piece Numer katalogowy: SSAA0061 |
