System obróbki M4 Wet Heavy Metal
 |
Ioniser M4 Device for the electrostatic discharge of plastic shavings for more cleanliness during the milling process (optionally for the new device or as retrofitting article) Numer katalogowy: ZBAC3301 |
|
 |
Raw-Abutment® Holder Holder for fixing and for the serial processing of up to ten prefabricated titanium abutment blanks (Raw-Abutments®) in the Zirkonzahn milling unit Numer katalogowy: ZBAC3451 |
|
 |
Glass Ceramics Holder Holder for fixing and for the serial processing of up to ten glass ceramic blanks in the Zirkonzahn milling unit Numer katalogowy: ZBAC3431 |
|
 |
Zero-point stylus D6 for milling unit M1/M4 For calibration of zero-position for Milling Unit M1/M4 Średnica: Ø 6mm Numer katalogowy: ZBAC0731 |
|
 |
2-Blank-Plate M4 Holding device for the elaboration of up to two material blanks (Ø 95 mm) with the M4 Wet Heavy Metal milling unit Numer katalogowy: ZBAC3411 |
|
 |
4-Blank-Plate M4 Holding device for processing up to four material blanks (Ø 95 mm) with the M4 Wet Heavy Metal milling unit Numer katalogowy: ZBAC3401 |
|
 |
Teleskoper Plate M4 Holding device for processing one material blank (Ø 95 mm, Ø 98 mm, Ø 106 or Ø 125 mm) with the M4 Wet Heavy Metal milling unit Numer katalogowy: ZBAC3421 |
|
 |
Nowosc! Blank Holder Teleskoper Soft Resin holder for fixing soft material blanks (zirconia, resin, wax, wood and Sinternit). |
