Zirkograph 025 ECO 

---

The original
This copy-milling unit, also called 'The Volksfräser', is a machine designed for the manual manufacture of crown & bridge framework made of zirconia. The Volksfräser has been conceived in such a way that, owing to its small dimensions of 59 cm length and 25 cm width, it can be ideally used as a lab bench. Contrary to the Zirkograph 025, our 5-axis milling unit, the Volksfräser is supplied in its base execution as a 4-axis milling equipment only. Nevertheless, this is not a disadvantage because works with up to 14 units can be performed. Only wide spread, implant-borne, occlusally screw-retained bridges cannot be realized since the individual implants are never placed in parallel but they diverge more or less from one another. A 5th axis is required for such special bridges. As of now this 5th axis is available for the Volksfräser as well.

„The Zirkograph has added some zest/brought life into our laboratory, and how!“ Yves Probst, master dental technician from France

Zirkograph 025 ECO with 5th axis.

---

 

Lenght:	59 cm
Width:	25 cm
Height:	57 cm
Weight:	21 kg
Output Power:	190 W
Compressed Air Supply:	6 bar
Range of Application:	From single crowns to 16-unit bridges (using the 5th axis occlusally screw-retained bridges can be created)
Remarks:	5th axis optional by request

Designer Zirkograph 

---

Photogallery

Designer Zirkograph

---

 

Accessories 

---

	5th axis for Zirkograph 025 ECO Five axes milling device for the Zirkograph 025 ECO, which allows you any movement to accommodate complex cases Item numberr: ZBAA8241
	Pendulum Content: 1x pendulum arch, 2x retainer pins (2.46/M2; 2.05/M1.4), 2x positioning screws Assists perpendicular abutment alignment of screw retained implant bridges for milling Item number: ZBAA8231
	Retainer Pin 2,46/M2 Accessory for pendulum Item number: ZBAA8351
	Retainer Pin 2,05/M1,4 Accessory for pendulum Item number: ZBAA8361
	Retainer Pin 3/M2 Accessory for pendulum Item number: ZBAA8371
	Retainer Pin 1,6/M1,4 Accessory for pendulum Item number: ZBAA8381
	Retainer Pin long 2,46/M2 Accessory for pendulum for extra long screw canals Item number: ZBAA8356
	Retainer Pin long 2,05/M1,4 Accessory for pendulum for extra long screw canals Item number: ZBAA8366
	Retainer Pin long 3/M2 Accessory for pendulum for extra long screw canals Item number: ZBAA8376
	Retainer Pin long 1,6/M1,4 Accessory for pendulum for extra long screw canals Item number: ZBAA8386
	Dust ring for Zirkograph 025 Quantity: 1 pc Optimal extraction power and reduced dust spreading over your workbench Item number: ZBAA8291
	Dust ring for Zirkograph 025 ECO Quantity: 1 pc Optimal extraction power and reduced dust spreading over your workbench Item number: ZBAA8301
	Dust cover for Zirkograph 025 Quantity: 1 pc Item number: ERAA0511
	Dust cover for Zirkograph 025 ECO Quantity: 1 pc Item number: ERAA0421
	Dust cover for Zirkograph 025 ECO 5. Achse Quantity: 1 pc Item number: ZBAA8271
	Dust cover for Designer Zirkograph - Back Quantity: 1 pc Item number: ZBAA9601
	Dust cover for Designer Zirkograph - Front Quantity: 1 pc Item number: ZBAA9611
	Dust Bowl for Zirkograph 025 Content: 1 bowl Maximises dust extraction suction during milling (only in combination with tilting device) Item number: ZBAA9501
	Dust Bowl for Zirkograph 025 ECO and Designer Zirkograph Content: 1 bowl Maximises dust extraction suction during milling (only in combination with 5th axis) Item number: ZBAA9511
	Upgrade Set for dust Bowl for Zirkograph 025 Content: 1 bowl, 2 intermediate panels Maximises dust extraction suction during milling (only in combination with tilting device) For systems without built-in magnets Item number: ZBAA9551
	Upgrade Set for dust Bowl for Zirkograph 025 ECO and Designer Zirkograph Content: 1 bowl, 2 intermediate panels Maximises dust extraction suction during milling (only in combination with 5th axis) For systems without built-in magnets Item number: ZBAA9561
	Ball bearing housing for spring arm D=12 mm Spring slide connector to horizontal spring arm Item number: ERAA0011
	Spring for Zirkograph 025 ECO and Designer Zirkograph Support spring for milling arm Item number: ERAA0623
	Clamp claw aluminium Fastens milling table inserts For Zirkograph 025, 025 ECO and Designer Zirkograph Item number: ERAA0871
	Cylinder head screw M4 x 8 galvanized for stainless-steel inserts Fastens clamps for milling table inserts Item number: ERAA0031
	Cylinder head screw M4 x 12 galvanized for stainless-steel inserts Fastens clamps for milling table inserts Item number: ERAA0033