Elaboration Instruments – Product Info  

---

Our product range covers the entire spectrum of the zirconium processing. They are subdivided into abrasive stones for the turbine and abrasive devices for the tool holder.

There are four different tungsten-carbide burs for the tool holder, used for processing green zirconium, two diamond burs and five zirconium oxide stones for the post-processing of sintered zirconium, a diamond rubber and two separating discs, one for green zirconia and one for sintered zirconia.
For the turbine, three different diamond blurs are available for the elaboration of sintered zirconia.

By processing the zirconia structures it is important not to set the revolutions per minute too high. For the elaboration with the tool holder a maximum of 10.000 rpm is recommended. Furthermore, do not apply an excessive pressure on the turbine and use water cooling.   

Tungsten-Carbide Bur 

---

	Tungsten-Carbide Bur 001 Bullet Fine tungsten-carbide bur for trimming pre-sintered zirconia Package content: 2 pieces ø: 2.35 mm Length: 7.5 mm Shank diameter: 2.35 mm Item number: ZZ001
	Tungsten-Carbide Bur 002 Bullet Fine tungsten-carbide bur for trimming pre-sintered zirconia Package content: 2 pieces ø: 1.2 mm Length: 7.5 mm Shank diameter: 2.35 mm Item number: ZZ002
	Tungsten-Carbide Bur 003 Round End Cylinder Fine tungsten-carbide bur for trimming pre-sintered zirconia Package content: 2 pieces ø: 2.3 mm Length: 15 mm Shank diameter: 2.35 mm Item number: ZZ003
	Tungsten-Carbide Bur 004 Round End Cylinder Fine tungsten-carbide bur for trimming pre-sintered zirconia Package content: 2 pieces ø: 2.9 mm Length: 13 mm Shank diameter: 2.35 mm Item number: ZZ004

Diamond Bur 

---

	Diamond Bur 101 Flat End Taper For lab hand piece used for trimming ceramics Package content: 5 pieces ø: 1.6 mm Length: 10 mm Shank diameter: 2,35 mm Item number: ZZ101
	Diamond Bur 102 Flame For lab hand piece used for trimming ceramics Package content: 5 pieces ø: 1.2 mm Length: 10 mm Shank diameter: 2.35 mm Item number: ZZ102
	Diamond Bur 201 Round End Taper Friction grip sintered diamonds or water-cooled turbine, used for trimming sintered zirconia Package content: 5 pieces ø: 2.1 mm Length: 10 mm Shank diameter: 1.6 mm Item number: ZZ201
	Diamond Bur 202 Needle Friction grip sintered diamonds or water-cooled turbine, used for trimming sintered zirconia Package content: 5 pieces ø: 1.1 mm Length: 10 mm Shank diameter: 1.6 mm Item number: ZZ202
	Diamond Bur 203 Flat End Cylinder Friction grip sintered diamonds or water-cooled turbine, used for trimming sintered zirconia Package content: 5 pieces ø: 1.1 mm Length: 6.5 mm Shank diameter: 1.6 mm Item number: ZZ203

Elaboration Instruments 

---

 

Set Zirconia Finishing 901 Package content: 12 different zirconia working tools and other materials Item number: ZZ901

---

 

	Diamond Rubber Wheel 403 Used to polish sintered zirconia Package content: 3 pieces ø: 16 mm Width of the Disc: 1.3 mm Shank diameter: 2.35 mm Item number: ZZ403
	Diamond Separating Disc 501 Used to cut pre-sintered zirconia Package content: 1 piece ø: 32 mm Width of the Disc: 0.3 mm Shank diameter: 2.35 mm Item number: ZZ501
	Diamond Separating Disc 502 Used to cut pre-sintered zirconia Package content: 1 piece ø: 19.5 mm Width of the Disc: 0.2 mm Shank diameter: 2.35 mm Item number: ZZ502
	Three-bladed Milling Bur Cuts Frame-resin templates with handpiece Package content: 1 piece Item number: FR811

Elaboration stone for zirconia 

---

Set Finishing stone for zirconia 306 Used for trimming of sintered zirconia Package content: 5 finishing stones for zirconia Item number: ZZ306

---

	Finishing stone for zirconia 301 Package content: 2 pieces ø: 12.7 mm Height: 3,2 mm Shank diameter: 2,35 mm Item number: ZZ301
	Finishing stone for zirconia 302 Package content: 2 pieces ø: 12.7 mm Height: 2 mm Shank diameter: 2,35 mm Item number: ZZ302
	Finishing stone for zirconia 303 Package content: 3 pieces ø: 7.8 mm Height: 3.5 mm Shank diameter: 2.35 mm Item number: ZZ303
	Finishing stone for zirconia 304 Package content: 3 pieces ø: 4 mm Height: 12.7 mm Shank diameter: 2.35 mm Item number: ZZ304
	Finishing stone for zirconia 305 Package content: 6 pieces ø: 2.7 mm Height: 7 mm Shank diameter: 2.35 mm Item number: ZZ305

Diamond sharpening stone 

---

 

Set Diamond Impregnated Stone 316 Used for trimming of sintered zirconia Long Durability Package content: 3 Diamond Impregnated Stones Item number: ZZ316

---

 

	Diamond Impregnated Stone 311 Package content: 2 pieces ø: 3.8 mm Shank diameter: 2.35 mm Item number: ZZ311
	Diamond Impregnated Stone 312 Package content: 2 pieces ø: 4,8 mm Shank diameter: 2.35 mm Item number: ZZ312
	Diamond Impregnated Stone 313 Package content: 2 pieces ø: 12.3 mm Shank diameter: 2.35 mm Item number: ZZ313

Zirconia polishers 

---

The new zirconia polishers ensure a fast, safe and low-heat treatment of zirconium oxide without neglecting precision. As of now Zirkonzahn offers zirconia polishers in three different types (blue, pink, grey): The blue version is particularly suitable for defining frameworks and their edges, whereas pink and grey polishers can be used to polish and finish unblended areas. The polishers are available as a set (small polishers, lenses, disks). Lens, wheel, disk and tip can also be ordered separately in all three versions. This new product stands out because of its remarkably high stability.      

Set zirconia polishers small For working sintered zirconia Package content: 6 different zirconia polishers Item number: ZZ451

---

	Zirconia polisher wheel blue For the rough-working of sintered zirconia Package content: 2 pieces ø: 11.5 mm Strength: 2 mm Shank diameter: 2.35 mm Item number: ZZ412
	Zirconia polisher wheel pink For the fine-working of sintered zirconia Package content: 2 pieces ø: 11.5 mm Strength: 2 mm Shank diameter: 2.35 mm Item number: ZZ422
	Zirconia polisher wheel grey For high-polishing sintered zirconia Package content: 2 pieces ø: 11.5 mm Strength: 2 mm Shank diameter: 2.35 mm Item number: ZZ432
	Zirconia polisher flame blue For the rough-working of sintered zirconia Package content: 3 pieces ø: 3.3 mm Height: 7 mm Shank diameter: 2.35 mm Item number: ZZ411
	Zirconia polisher flame pink For the fine-working of sintered zirconia Package content: 3 pieces ø: 3.3 mm Height: 7 mm Shank diameter: 2.35 mm Item number: ZZ421
	Zirconia polisher flame grey For high-polishing sintered zirconia Package content: 3 pieces ø: 3.3 mm Height: 7 mm Shank diameter: 2.35 mm Item number: ZZ431

Set zirconia polishers disc For working sintered zirconia Package content: 3 different zirconia polishers disc Item number: ZZ461

---

	Zirconia polisher disc blue Without mandrel For the rough-working of sintered zirconia Package content: 1 piece ø: 22 mm Strength: 3.5 mm Item number: ZZ413
	Zirconia polisher disc pink Without mandrel For the fine-working of sintered zirconia Package content: 1 piece ø: 22 mm Strength: 3.5 mm Item number: ZZ423
	Zirconia polisher disc grey Without mandrel For high-polishing sintered zirconia Package content: 1 piece ø: 22 mm Strength: 3.5 mm Item number: ZZ433

New Set polishers disc extra thin For working sintered zirconia Package content: 3 different zirconia polishers disc extra thin Item number: ZZ481

---

	New Zirconia polisher disc extra thin blue Without mandrel For the rough-working of sintered zirconia Package content: 1 piece ø: 20 mm Strength: 1 mm Item number: ZZ415
	New Zirconia polisher disc extra thin pink Without mandrel For the fine-working of sintered zirconia Package content: 1 piece ø: 20 mm Strength: 1 mm Item number: ZZ425
	New Zirconia polisher disc extra thin grey Without mandrel For high-polishing sintered zirconia Package content: 1 piece ø: 20 mm Strength: 1 mm Item number: ZZ435

Set zirconia polishers lense For working sintered zirconia Package content: 3 different zirconia polishers lense Item number: ZZ471

---

	Zirconia polisher lense blue Without mandrel For the rough-working of sintered zirconia Package content: 1 piece ø: 22 mm Strength: 3 mm Item number: ZZ414
	Zirconia polisher lense pink Without mandrel For the fine-working of sintered zirconia Package content: 1 piece ø: 22 mm Strength: 3 mm Item number: ZZ424
	Zirconia polisher lense grey Without mandrel For high-polishing sintered zirconia Package content: 1 piece ø: 22 mm Strength: 3 mm Item number: ZZ434

Mandrel For zirconia polishers: lense and disc Package content: 5 pieces Shank diameter: 2.35 mm Item number: ZZ441