3D printing system with printer, software, post-curing lamp and resin
With the new 3D printing system, Zirkonzahn provides dental technicians and dentists with a practical solution for the manufacture of resin dental models. In this way, practices and mid-size dental laboratories can now benefit from a pre-set package specially conceived for the dental workflow. The complete system with pre-configured settings is particularly advantageous: not only does it ensure full compatibility between all components included, but it prevents the user from spending valuable time testing print parameters or finding the most suitable resins and devices to use in combination with the printer. The system includes:
LCD printer with 4K monochrome display (XY resolution: 0.052 mm) and heated printing chamber.
P4000 Printer is a space-saving LCD printer equipped with a touch screen with intuitive user interface as well as WiFi, LAN and USB connections for stand-alone operations. Depending on the structure and dimensions, the large printing volume permits the simoultaneously production of up to 21 Geller models or 15 full-arch bridges. The resin vat is provided with state-of-the-art nFEP film permeable to oxygen, which, in combination with the LED panel, enables a distortion-free manufacture of dental objects in a short time. The 3D printer is open-system but works ideally in combination with the Printer Resins and Printer Resins Waterbased by Zirkonzahn, available in many colours and for different uses.
Zirkonzahn.Slicer is fully compatible with both Zirkonzahn.Modellier and Zirkonzahn.Modifier software: the user can create the models using the Model Maker software module available in both design software and then simply import them into the slicing software for further editing. Zirkonzahn.Slicer is specifically conceived for dental use and its pre-configured settings ensure a smooth and uniform printing workflow. The pre-set parameters also allow the creation of support structures for a wide variety of dental restorations, while the printing option in multiple resolutions further reduces the printing time.
L300 Post-curing Lamp
UV LED lamp (365 nm, 385 nm, 405 nm)
The L300 Post-Curing Lamp is provided with a 360° turntable which ensures a uniform curing of the model. The post-curing lamp is also equipped with a digital control system which allows the user to complete the set-up with only one click.
Technical data:
Size (L x W x H)
21.5 x 19.5 x 28.5 cm
Inner capacity (L x W x H)
17.5 x 14 x 18.5 cm
Weight
4,2 kg
LED specification
365 nm, 385 nm und 405 nm
UV light intensity
60 W in total
Operating voltage
100 – 240 V ~ 50 – 60 Hz
Printer Resin Waterbased Beige
Water-based fluid resin (405 nm)
Particularly fluid resin with low shrinkage values for highly stable printed results, which can be cleaned with water in an ultrasonic bath; not approved for intraoral use.
Indications:
Production of simple and complex models:
Models with removable dies
Models with prepared, non-removable dies
Models with ScanAnalogs in case of restorations on implants
Models with removable gingiva
Models with honeycomb inner structure
Models with JawAligner system
Models with dynamic attachments for the Mini-Arti ZS1
Models with articulator attachments
Technical data:
Wave lenght
405 nm
Package content
1 kg/bottle
Liquid Density
1.1 g/cm³
Viscosity at 25 °C (77 °F)
60 – 100 cP
Surface hardness
76 Shore D
Flexural strength
65.7 MPa
Flexural modulus
1542 MPa
Printer Resin Speed White
Liquid resin for a faster printing process (405 nm)
Liquid resin with high dimensional stability which allows a 15-20 % faster printing process (1.35 sec. per print). Thanks to the material opacity, details can be also perceived easily. The resin can be cleaned with alcohol; not approved for intraoral use.
Indications:
Production of simple and complex models:
Models with removable dies
Models with prepared, non-removable dies
Models with ScanAnalogs in case of restorations on implants
Models with removable gingiva
Models with honeycomb inner structure
Models with JawAligner system
Models with dynamic attachments for the Mini-Arti ZS1
Models with articulator attachments
Technical data:
Wave lenght
405 nm
Package content
1 kg/bottle
Liquid Density
1.13 g/cm³
Viscosity at 25 °C (77 °F)
150 – 230 cP
Surface hardness
90 Shore D
Notched Izod Impact
24.0 J/m
Tensile strength
28 MPa
Tensile modulus
920 MPa
Elongation at break
7%
Printer Resin Burnout Green
Liquid resin ideal for lost-wax casting (405 nm)
The liquid resin leaves no residues while burning out and is ideal for lost-wax casting of partial denture frameworks and disilicate crowns. It can be cleaned with alcohol; not approved for intraoral use.
*This is an international advertisement. Not all products mentioned are available in all countries. The product’s area of application may differ according to the country. Please contact your Sales Team for more detailed information.
