Todos o fornos da nossa nova geração possuem un design compacto. Estão perfeitamente equipados e podem alcançar uma temperatura de sinterização de até 1800°C, ideal para os materiais e tecnologias do futuro.
Graças ao processo de vácuo é possível realizar a sinterização de metais não-ferrosos. Este método também torna a Zirconia Prettau® ainda mais translúcida (nos modelos com sinterização em ausência de oxigênio).
Em caso de necessidade, a troca de peças (reposição) pode ser feita facilmente, sem a intervenção de um técnico especializado.
The Zirkonofen 600/V4 sintering furnance features optimised electronics and a newly developed software. Thanks to its compact design and the proven combustion technology, the furnace is extremely energy-efficient. Maximum heating rates of 60 °C/min. and the new automated furnace door which accelerates the cooling process, permit even faster sintering of thin structures.
Maximum user friendliness
Monitoring via smartphone
The new Zirkonzahn.App enables remote monitoring of the furnace. This makes all necessary information quickly and clearly visible.
The app also allows the creation of new sintering programmes directly on the smartphone.
Intuitive software
The newly designed software offers the user a wide range of possibilities: updates can be downloaded and installed directly on the furnace, individual sintering programmes can be created intuitively by the user, a delayed start of the sintering process is possible. Every sintering process is recorded (logged) so that everything can be perfectly monitored and controlled.
LED lighting with status display
The characteristic LED illumination of the Zirkonofen 600/V4 also serves as a status display. Using four different colours, it shows at a glance the current operating status of the furnace.
Software
The software of the Zirkonofen 600/V4 is clearly structured and features an easy-to-use interface. Based on the user behaviour, the software recognises the most frequently used programmes and saves them as favourites, for an easier selection when starting a new sintering cycle.
Brand new technologies
Automated furnace door
The intelligent control system developed in-house constantly monitors the furnace status and the firing process. The fully automated furnace door, which serves to accelerate the cooling of the sintering chamber and the furnace control system guarantee linear heating and homogeneous cooling of the furnace. This ensures a successful sintering process.
Efficient performance
A new high-performance control of the heating elements and an optimally insulated sintering chamber make the furnace extremely energy-efficient and ensure increased max. heating rates of up to 60 °C/min.
The sintering chamber can contain up to 60 zirconia elements, which can be sintered with a power requirement of less than 1.5 kWh.
Baking Recovery
After a power failure, the intelligent software checks whether the sintering programme can be regularly completed without compromising the result. If the sintering programme can be continued, the user can see on the screen in which phase of the programme the interruption occurred. If the programme cannot be completed, the software will inform the user.
Sintering programmes
×
The Zirkonofen 600/V4 includes a large number of pre-set programmes and is equipped with pre-set fast sintering programmes perfectly adapted to each Zirkonzahn zirconia material. This means that the heating, holding and cooling phases vary slightly depending on the material. In addition, the user can create personal sintering programmes.
Technical data
Size (W x H x D)
39 x 69 x 49 cm
Weight
75 kg
Power
1.500 W
Mains voltage
110 - 240 V~ / 50 - 60 Hz
Sintering chamber capacity
0,6l
Combustion chamber
6 x 10 x 10 cm
Max. temperature
1.700 °C
Vacuum
No
Capacity
Up to 60 zirconia elements (with sintering trays)
Materials
Zirkonzahn zirconia, zirconia from other manufacturers
Most important features of the zirkonofen 600/v4 sintering furnace
Speed sintering of zirconia in less than 3 hours
Heating rates of up to 60 °C/min. possible
Capacity for up to 60 zirconia elements
Cooling rates of up to 40 °C/min. possible
2 MoSi2 high-performance heating elements
Controlled cooling thanks to to the automated furnace door
Sintering chamber capacity of 0.6 l
Maximum sintering temperature of up to 1700 °C
Maximal sintering time over 1500 min. per program
Control accuracy of +/ -2 °C at a final temperature of 1600 °C
Baking Recovery Function
Independent temperature calibration possible
7“ colour touch screen
Large number of pre-set programmes
New, user-friendly software
Personalised sintering programmes
Update via LAN or WIFI
Compact, modern design with high-quality full glazing
Moderno, construido em vidro temperado de alta qualidade
Programas de sinterização especiais a pedido do cliente
Possibilidade de actualização através de interface USB
Programação através de touch screen de 4,3'' a cores
Upgradable to sintering furnace Zirkonofen 700 Ultra Vakuum
Refrigeração para um arrefecimento controlado
Dados técnicos:
Tamanho (Y x X x Z)
48,4 x 69,3 x 54,5 cm
Peso
117 kg
Potência
2300 W
Volume da câmara de combustão
0,8 l
Tamanho câmara de combustão (Y x X x Z)
8 x 10 x 10 cm
Temp. máx.
1700° C
Vácuo
Não
Capacidade
aprox. 120 elementos
Zirkonofen 700 Ultra-Vakuum
4 MoSi2 heating elements
New sintering technique
13 preset programmes
Larger combustion chamber
Modern high quality full glazing
Individual sintering programmes on request
Updatable via USB port
4,3” colour touchscreen
Upgradeable with special adapter for sintering Sintermetal
Controlled cooling
Oxygen-free sintering / High Vacuum
Ideal for new material technologies
Sintering without shielding gas and residual oxides
CHARACTERISTICS:
For sintering of zirconia
In combination with the easy-to-install sinter adapter Sinter Metal Furnace Adapter also for sintering of sinter metal (especially economically, since no additional sintering furnace needed)
Low maintenance, very robust
Low consumption of the heating elements
No contamination of the combustion chamber, because it is hermetically sealed
Tecnical data:
Size (W x H x D)
48,4 x 69,3 x 54,5 cm
Weight
117 kg
Output Power
2300 W
Combustion Chamber Capacity
0,8 l
Dimension Combustion Chamber (W x H x D)
8 x 10 x 10 cm
Max. Temperature
1700° C
Vacuum
Yes
Capacity
approx. 120 zirconia elements (with sintering trays) or 25 Sintermetall elements
NOVOZirkonofen Turbo
ZIRKONOFEN TURBO - A NEW ERA BEGINS
Driven by diligence, dedication and enthusiasm, we strive tirelessly to give our clients always and only the best. We are aware of their requirements and we know our ambitions. It is the union of these two aspects that leads us to the best results. We never overlook any detail, searching for new solutions with meticulous attention until the finest point is set – only then can we be truly proud of our product. Our constant search for perfection and innovation drives us day by day and we do not know what the word "rest" means.
No challenge is too tough for us and we have proved it again.
With the new Zirkonofen Turbo and its pre-set fast sintering programs for each kind of Zirkonzahn zirconia, it is now possibile to sinter smaller zirconia structures in about 75 minutes. This cuts processing time by 84% and reduces electric consumption by 81%: zirconia structures can be milled, sintered and veneered in 1 hour and 55 minutes only!
The sintering platform is controlled by an intelligent electronic system developed in-house. This system monitors the temperature curve of the sintering chamber and controls the platform during the cooling phase.
If the sintering chamber does not cool down quickly enough, the platform moves automatically downwards, ensuring optimal cooling processes and perfect sintering results.
SINTERING PROGRAMS
The Zirkonofen Turbo includes a large number of pre-set programs that are perfectly matched to each kind of Zirkonzahn zirconia. This means that the heating, holding and cooling phases vary slightly depending on the material. In addition, the user can create personal sintering programs.
The Speed and Ultraspeed programs cannot be used for sintering dental unit with a wall thickness exceeding 4 mm. Therefore, when selecting the sintering speed, attention must be paid to the elements' wall thickness and weight.
Personalised programs according to
the following parameters:
Temperature range
Heating rate
Room temperature – 300 °C
50 °C/min
300 °C – 1100 °C
120 °C/min
1100 °C – 1700 °C
60 °C/min
Temperature range
Cooling rate
1700 °C – 1200 °C
60 °C/min
1200 °C – 800 °C
40 °C/min
800 °C – Room temperature
30 °C/min
SLOW PROGRAM – 12 H
heavy
≥ 5 g per unit
STANDARD PROGRAM – 8 H
medium heavy
3-5 g per unit
SPEED PROGRAM – 3,5 H
light
2-3 g per unit
ULTRASPEED PROGRAM – 75 min
super light
≤ 2 g per unit
Shortest program – 45 min
Large number of pre-set programs
Personalised sintering programs
The Zirkonofen Turbo is equipped with pre-set fast sintering programs perfectly adapted to each Zirkonzahn zirconia material. The smaller and thinner the structure to be sintered, the shorter the required sintering time. With this furnace, 4-unit bridges can now be sintered in approx. 75 minutes.
Baking Recovery
With the new Baking Recovery function, unsatisfactory sintering results are nearly impossible! After a power failure, the intelligent software checks whether the sintering program can be regularly completed without compromising the result orr whether the sintering process must be must be suspended. If the sintering program can be continued, the user can see on the screen in which phase of the program the interruption occurred. If the program cannot be completed, the software will inform the user.
CAPACITY
In the Zirkonofen Turbo, zirconia restorations can be sintered by means of special accessories, like the sintering trays and the ceramic plate. The sintering chamber can contain up to 3 sintering trays stacked on top of each other, which permit sintering up to 120 zirconia elements in one single process. If bridges are sintered with a sintering stabiliser, the ceramic plate must be used, which offers space for up to 3 full-arch bridges.
To avoid pressure marks on the zirconia elements during sintering, the elements must be placed on the sintering tray well apart from each other. To prevent discolouration, the base of the sintering tray should be covered with sintering granules.
The sintering chamber contains up to 3 sintering trays stacked on top of each other. In this way, up to 120 zirconia elements can be sintered in one sintering process.
To prevent discolouration or contamination of zirconia structures during the sintering process, it is recommended to cover the bridges with a ceramic protection cover. The new ceramic protection cover, with its curved shape, guarantees optimal heat distribution.
TEMPERATURE CALIBRATION
Every Zirkonofen Turbo is optimally calibrated before delivery, in order to achieve the best sintering results right from the first usage. Thanks to the temperature calibration program, the user can check at any time the oven's temperature control accuracy of +/- 2 °C at a final temperature of 1600 °C. If necessary, values can be corrected directly in the software.
1. Place the temperature calibration ring without using firing supports on the sintering platform and start the temperature calibration program
2. Let the ring cool down to room temperature and measure the diameter with a micrometer screw
3. Compare the measured value with the reference table and enter the difference in the software. Perform a second temperature calibration to check the final sintering temperature
To obtain the highest quality results with unchanged translucency, colour gradient or flexural strength values, it is essential to adapt the sintering program to the material and to the structure to be sintered.
If parameters are correct but the results are still unsatisfactory, a temperature calibration must be carried out.
Software
The software, developed in-house, has been re-designed especially for the Zirkonofen Turbo.
A wider range of languages is now available to the users. Via the Internet connection, they can download and install updates directly in the furnace, in order to always work with the latest functions and sintering programs. The software also permits creating individual sintering programs in addition to the pre-set ones and, based on the user behaviour, it recognises the most frequently used programs and saves them as favourites, for an easier selection when starting a new sintering cycle.
LED LIGHTING WITH STATUS DISPLAY
The four different coloured displays show at a glance the current status of the Zirkonofen Turbo:
Green = idle mode
ready for a sintering process
Purple = heating and
holding phase
the sintering process is underway
Light blue = cooling phase
the sintering chamber is being cooling down
Red = error
a problem has occurred
DOWNLOAD BROCHURE
Our long-standing experience in the development of CAD/CAM milling units, scanners and sintering furnaces makes us the experts in this field. With innovation and strong willpower, we develop holistic products that are perfectly integrated into the Zirkonzahn workflow.
With the Zirkonofen Turbo, we start a new era together.
Round sintering chamber with room for up to
120 zirconia elements
Cooling rate of up to 60 °C/min possible
4 MoSi2 high-performance heating elements
Automated cooling through fully automatic sintering platform
Large sintering chamber with a capacity of 0.9 l
Maximum sintering temperature of 1700 °C
Over 1000 min. sintering time per program
Control accuracy of +/- 2 °C at a final temperature of 1600 °C
Baking Recovery Function
Independent temperature calibration
7“ colour touch screen
Large number of pre-set programs
New, user-friendly software
Personalised sintering programs
Update via LAN or WIFI
Compact, modern design with high-quality full glazing
TECHNICAL DATA:
Size (W x H x D)
39 x 69 x 49 cm
Weight
65 kg
Electrical power
3000 W
Mains voltage
200 - 240 V~ ± 10%V/
50 - 60 Hz
Combustion Chamber Capacity
0,9l
Large sintering chamber
10,5 x 10,5 ⌀ cm
Max. temperature
1700° C
Vacuum
No
Capacity
Up to 120 zirconia elements (with sintering tray) or up to 3 circular bridges (with ceramic plate)
Mirror
Orange
Red
Black
Accessories
Novo! Sintering tray Speed Zirkonofen Turbo
The trays have been specially designed to ensure perfect heat distribution during sintering and for use in combination with the Ultraspeed program. Up to 3 sintering trays can be placed in the furnace. In this way up to 120 zirconia elements can be sintered in one sintering process.
Número do produto: ZBAA3221
Novo! Ceramic plate Zirkonofen Turbo
Sintering support to avoid contact stains on the framework. It can contain max. 3 full-arch bridges. It cannot be used with the Ultraspeed program.
Número do produto: ZBAA9441
Novo! Ceramic protection cover Zirkonofen Turbo
For optimal colour fidelity of the zirconia structures during sintering. The curved shape serves for optimal heat distribution inside the protection cover. It cannot be used with the Ultraspeed program.
Número do produto: ZBAA4671
Novo! Temperature calibration ring for Zirkonofen Turbo
Content: 10 rings for temperature calibration of the Zirkonofen Turbo sintering furnace.
A micrometer screw (or similar) to measure the ring diameter is required.
Número do produto: ZBAC9081
Novo! Tweezers for Zirkonofen Turbo
Stainless steel tweezers for removing the sintering tray from the sintering chamber (included).
Número do produto: ZBAC9082
Fine-grain sintering granules
Sintering powder for sintering zirconia structures with sintering trays. Size: 0.4 mm – 1.0 mm
Número do produto: ZBAA3251
Coarse-grain sintering granules
Sintering powder for sintering zirconia structures with sintering trays. Size: 0.3 mm – 2.0 mm
Número do produto: ZBAA3261
SINTERING SPEEDSSintering speeds that can be selected using the different sintering furnaces.
hours
0
1
2
3
4
5
6
7
8
9
10
11
12
Zirkonofen
600/V3
Zirkonofen
700
Zirkonofen
Ultra-Vakuum
Zirkonofen
Turbo
Sinterofen
300S
SLOW
STANDARD
SPEED
ULTRA-SPEED
METAL SINTERING
Sinterofen 300S – Sintering furnace for the sintering of Zirkonzahn’s sinter metal
Durable SiC heating elements
New sintering technique
Modern high quality full glazing
Individual sintering programmes on request
Updatable via USB port
4,3” color touchscreen
Controlled cooling
Oxygen-free sintering / High Vacuum
Deformation-resistant sintering of full arch structures
Sintering without shielding gas and residual oxides
The compact Sinterofen 300S sintering furnace is in the typical Zirkonzahn design fully glazed and has been developed especially for the sintering of our Sintermetall. The high performance vacuum pump enables oxygen-free sintering without the use of shielding gas. Thanks to the very long-lasting SiC heating elements, the furnace requires low maintenance and is very robust.
The optimal temperature distribution in the sintering furnace, the shrinkage factor of our Sintermetall of just 7% as well as its torsional stability allow the sintering of all milled dental restorations from single crowns, metal structures, telescopes, bars and attachments up to full arch bridges with a total lack of stresses in the metal.
Using the Sintering Tray Sintermetall XL 300S (for small structures of up to 5 elements) up to 50 Sintermetall elements can be sintered within the large sintering tube of the furnace. With the specially developed Sintering Holder XL 300S (patent pending), it is possible to sinter two full arch bridges or up to six bars in one sintering cycle. After the eight-hour sintering cycle, the oven cools down automatically and controlled. The sintering process as well as the remaining sintering time can be checked at any time on the easy-to-use 4,3 ” colour touchscreen control panel. The Sinterofen 300S is quickly and easily updateable via USB port.
Properties:
Equipped with a high vacuum pump for oxygen-free sintering
Sintering without shielding gas
Large combustion chamber for appr. 50 Sintermetall elements
With the special Sintering Holder XL 300S (patent pending) it is possible to sinter two full arch bridges or six bars in just one sintering cycle
Due to perfect temperature distribution in the furnace, manufacturing up to 14-unit restorations is possible
Sintering time: 8 hours
Automatically controlled cooling
Long-lasting SiC heating elements
Low maintenance, very robust
Modern high quality design (with Securit glass panels)
Easy operation thanks to the 4.3” colour touchscreen control panel which shows the sintering process and the remaining time
Updateable via USB port
Technical data:
Size (W x H x D)
45 x 56 x 70 cm
Weight
81 kg
Electrical power
2600 W
Combustion Chamber Capacity
0,7 l
Size Sinter Tube
75 x 150 mm
Max. temperature
up to 1350 °C
Vacuum
Yes
Capacity
approx. 50 Sintermetall elements, 2 bridges or
6 bars
