NEWBlank Holder Teleskoper Soft 

Blank Holder Teleskoper Soft
Resin holder for fixing soft material blanks (zirconia, resin, wax, wood and Sinternit).

More...

NEWMulti Blank Holder 

Multi Blank Holder
With the new Multi Blank Holder 4x1 and 7x1 Teleskoper it is now possible to process at the same time up to seven blanks in different colours. In this way, you can mill single crowns of 7 different patients in just one process. 

More...

General accessory 

Air Dryer
Air dryer with high performance compressed air filter with steam traps for eliminating the condensed water as well as other dirt particles inside the compressed air system of the compressor.

Item number: SYAB0450		  
Cooling Lubricant Milling (1 l)
Water-mixable coolant for wet processing

Item number: ZBAC2118
3D mouse
For even more intuitive moving of virtually constructed cases on the PC, like if you would hold the model in your own hands
Package content: 1 piece

Item number: ZBAC9041
Workbench Milling Unit
(60 cm x 73 cm x 95 cm)

Item number: ZBZA0111		      
Workbench Milling Unit
(133 cm x 73 cm x 95 cm)
 
Item number: ZBZA0101
Milling bur holder ZIRCONIA (3 mm)
The magnetic milling bur holder can be positioned almost anywhere in the milling unit, which guarantees proper and spacesaving storage of the different milling burs.
Package content: 1 piece

Item number: ZBAC1601
Milling bur holder ZIRCONIA (6 mm)
The magnetic milling bur holder can be positioned almost anywhere in the milling unit, which guarantees proper and spacesaving storage of the different milling burs.
Package content: 1 piece

Item number: ZBAC1606
Milling bur holder PMMA (3 mm)
The magnetic milling bur holder can be positioned almost anywhere in the milling unit, which guarantees proper and spacesaving storage of the different milling burs.
Package content: 1 piece

Item number: ZBAC1611
Milling bur holder PMMA (6 mm)
The magnetic milling bur holder can be positioned almost anywhere in the milling unit, which guarantees proper and spacesaving storage of the different milling burs.
Package content: 1 piece

Item number: ZBAC1616
Milling bur holder WAX (3 mm)
The magnetic milling bur holder can be positioned almost anywhere in the milling unit, which guarantees proper and spacesaving storage of the different milling burs.
Package content: 1 piece

Item number: ZBAC1621
Milling bur holder WAX (6 mm)
The magnetic milling bur holder can be positioned almost anywhere in the milling unit, which guarantees proper and spacesaving storage of the different milling burs.
Package content: 1 piece

Item number: ZBAC1626
Milling bur holder SINTER METAL (3 mm)
The magnetic milling bur holder can be positioned almost anywhere in the milling unit, which guarantees proper and spacesaving storage of the different milling burs.
Package content: 1 piece

Item number: ZBAC1632
Milling bur holder SINTER METAL (6 mm)
The magnetic milling bur holder can be positioned almost anywhere in the milling unit, which guarantees proper and spacesaving storage of the different milling burs.
Package content: 1 piece

Item number: ZBAC1633
Milling bur holder TITAN (6 mm)
The magnetic milling bur holder can be positioned almost anywhere in the milling unit, which guarantees proper and spacesaving storage of the different milling burs.
Package content: 1 set

Item number:  ZBAC1634
Milling bur holder CRCO (6 mm)
The magnetic milling bur holder can be positioned almost anywhere in the milling unit, which guarantees proper and spacesaving storage of the different milling burs.
Package content: 1 set

Item number:  ZBAC1635
Milling bur holder METAL (6 mm)
The magnetic milling bur holder can be positioned almost anywhere in the milling unit, which guarantees proper and spacesaving storage of the different milling burs.
Package content: 1 piece

Item number: ZBAC1636
Milling bur holder GLASS (3 mm)
The magnetic milling bur holder can be positioned almost anywhere in the milling unit, which guarantees proper and spacesaving storage of the different milling burs.
Package content: 1 piece

Item number: ZBAC1638
Milling bur holder GLASS (6 mm)
The magnetic milling bur holder can be positioned almost anywhere in the milling unit, which guarantees proper and spacesaving storage of the different milling burs.
Package content: 1 piece

Item number: ZBAC1639
Tool Organiser (6 mm)
The Tool Organiser guarantees safe storage of up to 50 milling burs. The interaction with the milling software allows a simple and clear management of the different milling burs.
Package content: 1 piece

Item number: ZBAC4331
Warranty extension CAD/CAM “all in”
Exchange of all defective wearing and spare parts of CAD/CAM System 5-TEC
(subject to device check by the manufacturer)
Duration: 1 year

Item number: GARANTIE 01
Maintenance contract for software modules
Automatic program updates, technical and dental technical customer support with and online remote maintenance
Duration: until the end of the calendar year

Article number upon request, depending on Software-Module CAD/CAM